The Sand Worm is a giant beast that can swallow a man whole.
Prints support free on FDM in parts and has pre-supported SLA version.
FDM: The Sand Worm was designed to print support free for FDM printers they files are cut into two pieces with a square key all will print support free
SLA: All Sand Worm STL files come pre-supported which includes the full Sand Worm and the Sand Worm cut into 3 pieces all keyed to fit on smaller SLA printers.
--MANIFEST--
FDM:
-- SandWorm.STL
-- SandWormBase_SupportFree.STL
-- SandWormHead_SupportFree.STL
-- SandWormKey.STL
SLA
-- SandWorm.STL
-- SandWormBase.STL
-- SandWormBody.STL
-- SandWormHead.STL
-- Keybottom.STL
-- KeyTop.STL
-- SandWorm_PreSupported.STL
-- SandWormBase_PreSupported.STL
-- SandWormBody_PreSupported.STL
-- SandWormHead_PreSupported.STL
-- Keybottom.STL
-- KeyTop.STL
--PRINTING TIPS--
FDM:
Print on an FDM printer, NO SUPPORTS, 0.2mm height, tested and works great with PLA and PETG.
This was test printed using a 0.2mm layer height quality profile. Smaller layers should work
even better.
SLA: Print using pre-supported files, use your favortie slicer. For larger prints reccommend hollowing out model and be sure to support the hollowed areas,